Step 5: Register the device

Your Connect Sensor+ must be registered with Digi Axess so that you can access the device in Digi Axess and map its location.

Before you begin

You will need this information to register your device:

• Serial number or IMEI

• The device group in which the device should be included.

To register your device:

1. Log in to a device's web UI from Digi Axess.

1. Navigate to digiaxess.com in your web browser.

2. Click Login. The Digi Axess Log In page displays.

3. Enter your user name and password.

   • User name: This is the user name assigned to you by Digi, and is usually your email address.

   • Password: Enter the password you chose during the initial account set up.

4. Click Submit to log in to Digi Axess. The Digi Axess update banner displays, on top of the Digi Axess map. If the banner does not display, it has been ignored in a previous session.

   • Click Don't Show Again to permanently turn off the banner.

   • Click Ignore to close the banner.

2. Access the Digi Axess Admin page.

   1. In the toolbar, click the down arrow next to your user name. The User Profile menu displays.

   2. Click Register New Device. The Register Device page displays.

3. In the Serial Number field, enter the unique identifier for the device. You can enter the device's serial number or IMEI.

   As an alternative, click the Scan Barcode button next to the field and use a camera or a saved image to enter an identifier.

4. From the Device Group list box, select a device group from the drop-down list.

5. (Optional) In the Subgroup field, enter a subgroup name.

6. Click Register.

 

 

ASSEMBLY IS COMPLETE