Step 5: Verify Connect Sensor XRT-M NEMA registration

After you have registered your device, you can wake the device and verify that it is mapped correctly in Digi Axess.

Note If you chose the None option for the Location Source during the initial registration, the Connect Sensor XRT-M NEMA will not be mapped in Digi Axess.

Before you begin

You will need a magnet to wake the device. Make sure you have a magnet available.

 

To verify the device registration:

  1. Wake the Connect Sensor XRT-M NEMA.

    1. Locate the magnet sensor sticker on the side of the device.

    2. Swipe the magnet across magnet sensor sticker to wake the device and force a cellular connection to Digi Axess.

    3. Check that the LED light remains solid green, to show that a connection has been established. For more information about the cellular LED process, see Step 3: Check the cellular connection.

  2. Log into Digi Axess at digiaxess.com in your web browser, and enter the user name and password.

    Or, if you are already logged into Digi Axess, click the map icon to return the Digi Axess map.

  3. Use the Search Devices field in the toolbar to find the device that you just registered. You can search by serial number or location name.

  4. As you type, devices that match the entry display. Continue typing to limit the list of devices and then click on the tile to select a device. The Device Summary page for the selected device displays.

  5. The information that displays in the Device Summary page depends on the configuration option you chose during initial registration.

    • Demo Configuration: This is the default configuration, and displays basic information in the Device Summary page: Analog in Voltage, Digital in, and Case temperature.

    • Blank Configuration: No data displays. You must manually configure the device in the device's Administration page.

    • Saved Configuration: Data for the options in the saved configuration display.

 

NEXT STEP: Proceed to Step 6: Wire the input sensors.