Wi-Fi configuration

The Wi-Fi enabled Connect EZ 8W device has Wi-Fi radio. You can configure the Wi-Fi radio for Wi-Fi access point mode and Wi-Fi client mode. By default, the Connect EZ 8W radio is configured to use access point mode.

Default access point SSID and password

By default, the Connect EZ 8W device has access point enabled. The default SSID for the access points is:

Digi-Connect EZ 8W-serial_number

The password for the default access point is the unique password as found on the device's label. See Change the default SSID and pre-shared key for the preconfigured Wi-Fi access point for information about changing the default SSID and password.

Default Wi-Fi configuration

The default Wi-Fi configuration of the Connect EZ 8W device is:

Wi-Fi radio

	Default setting
Enabled or disabled
Frequency band	2.4 GHz
TX power percentage	100
Access point mode	802.11b/g/n
Channel	Automatic
Channel width	20/40 MHz
Beacon interval	100

Access point

	Default setting
Name	Digi AP
Enabled or disabled	Enabled
SSID	Digi-Connect EZ 8W-serial_number
SSID broadcast	Enabled
Encyrption	WAP2 Personal (PSK)
Pre-shared key	The unique password printed on the bottom label of the device.
Group rekey interval	10 minutes
Isolate clients	Enabled

Client mode connections

None.