Filter the device list for auto-discovered devices

You can use the Discovered Devices option to filter which devices are included in the device list, depending on whether the device was auto-discovered or is a device that was manually added to the known device list.

1. Make sure Digi Navigator is installed and the Connect EZ 8 is powered and connected to your local network or to your computer with an Ethernet cable.

2. Launch the Digi Navigator.

3. From the toolbar, click Filters > Devices. Use the Discovered Devices menu option to filter the devices.

   • Selected: Both known and discovered devices are listed.

   • Not selected: Only known devices are listed.