Delete a port forwarding rule

To delete a port forwarding rule:

 

  Web

  1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access rights.
  2. Access the device configuration:

    1. Locate your device as described in Use Digi Remote Manager to view and manage your device.
    2. Click the Device ID.
    3. Click Settings.
    4. Click to expand Config.

    1. On the menu, click System. Under Configuration, click Device Configuration.

      The Configuration window is displayed.

  3. Click Firewall > Port forwarding.
  4. Click the menu icon (...) next to the appropriate port forwarding rule and select Delete.

  5. Click Apply to save the configuration and apply the change.

  1. Select the device in Remote Manager and click Actions > Open Console, or log into the Connect EZ 2 local command line as a user with full Admin access rights.

    Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

  2. At the command line, type config to enter configuration mode:

    > config
(config)>

  3. Determine the index number of the port forwarding rule you want to delete:
    (config)> show firewall dnat
0
	acl
		no address
		no zone
	enable true
	interface 
	ip_version ipv4
	label IPv4 port forwarding rule
	port 10000
	protocol tcp
	to_address6 10.10.10.10
	to_port 10001

1
	acl
		no address6
		no zone
	enable false
	interface 
	ip_version ipv6
	label IPv6 port forwarding rule
	port 10002
	protocol tcp
	to_address6 c097:4533:bd63:bb12:9a6f:5569:4b53:c29a
	to_port 10003
(config)>
  4. To delete the rule, use the index number with the del command. For example:
    (config)> del firewall dnat 1
  5. Save the configuration and apply the change.
    (config)> save
Configuration saved.
>
  6. Type exit to exit the Admin CLI.

    Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.