Disable interfaces on suspend

Log into the IX15 WebUI as a user with full Admin access rights.

1. On the menu, click System. Under Configuration, click Device Configuration.

   

   The Configuration window displays.
   

2. Click System > Power > Disabled interfaces on suspend.
   

3. The interfaces are listed:

   • Modem: Turn on this setting to disable the modem interface when the IX15 enters suspend mode.

   By default, all interfaces are enabled when going to suspend. Click available interfaces to toggle them to disable on suspend.

4. Click Apply to save the configuration and apply the change.
   

1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX15 local command line as a user with full Admin access rights.

   Depending on your device configuration, you may be presented with an Access selection menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

   > config
   (config)>

3. Disable the interfaces on suspend:

   (config)> system power suspend_interfaces <interface> true

   where <interface> is either:

   • modem: Turn on this setting to disable the modem interface when the IX15 enters suspend mode.

     By default none is disabled on suspend.

4. Save the configuration and apply the change:

(config)> save
Configuration saved.
>

5. Type exit to exit the Admin CLI.
   Depending on your device configuration, you may be presented with an Access selection menu. Type quit to disconnect from the device.