BD (Baud Rate)
This command applies to the XBee 868LP RF Module.
Sets or displays the serial interface baud rate for communication between the device's serial port and the host.
Values from 0 - 8 select preset standard rates.
Values at 0x100 and above select the actual baud rate if the host supports it.
Parameter range
Standard baud rates: 0x0 - 0x8
Non-standard baud rates: 0x100 to 0x6ACFC0
| Parameter | Description |
|---|---|
| 0x0 | 1200 b/s |
| 0x1 | 2400 b/s |
| 0x2 | 4800 b/s |
| 0x3 | 9600 b/s |
| 0x4 | 19200 b/s |
| 0x5 | 38400 b/s |
| 0x6 | 57600 b/s |
| 0x7 | 115200 b/s |
| 0x8 | 230400 b/s |
| The baud rate limit is 7 Mb/s. | |
Default
0x03 (9600 b/s)
PDF
