BD (Interface Data Rate)
This command applies to the XBee/XBee-PRO Zigbee RF Module.
Sets or displays the serial interface baud rate for communication between the device's serial port and the host.
The device interprets any value above 0x0A as an actual baud rate. Standard baud rates up to 115200 are supported. Non-standard baud rates above 115200 are permitted but their performance is not guaranteed.
Parameter range
Standard baud rates: 0x0 - 0x0A
| Value | Description |
|---|---|
| 0x1 | 2,400 b/s |
| 0x2 | 4,800 b/s |
| 0x3 | 9,600 b/s |
| 0x4 | 19,200 b/s |
| 0x5 | 38,400 b/s |
| 0x6 | 57,600 b/s |
| 0x7 | 115,200 b/s |
| 0x8 | 230,400 b/s |
| 0x9 | 460,800 b/s |
| 0xA | 921,600 b/s |
Default
0x03 (9600 b/s)
PDF
