This command applies to the XBee/XBee-PRO S2C DigiMesh 2.4.
Sets or displays the RSSI/PWM0 configuration (TH pin 6/SMT pin 7).
When configured as a PWM output, you can use M0 to set the PWM duty cycle.
0 - 5
| Parameter | Description |
|---|---|
| 0 | Disabled |
| 1 | RSSI PWM output |
| 2 |
PWM0 output. Value is controlled by M0 parameter or by I/O line passing. |
| 3 | Digital input |
| 4 | Digital output, low |
| 5 | Digital output, high |
1