This command applies to the XBee/XBee-PRO S2C DigiMesh 2.4.
The routing and messaging mode of the device.
A routing device repeats broadcasts. Indirect Messaging Coordinators do not transmit point-to-multipoint unicasts until an end device requests them. Setting a device as a poller causes it to regularly send polls to its Indirect Messaging Coordinator. Nodes can also be configured to route, or not route, multi-hop packets.
0 - 6
| Parameter | Description | Routes packets |
|---|---|---|
| 0 | Standard router | Yes |
| 1 | Indirect message coordinator | Yes |
| 2 | Non-routing device | No |
| 3 | Non-routing coordinator | No |
| 4 | Indirect message poller | Yes |
| 5 | N/A | N/A |
| 6 | Non-routing poller | No |
0