SM (Sleep Mode)
This command applies to the XBee/XBee-PRO S2C 802.15.4 RF Module.
Sets or displays the sleep mode of the device.
By default, Sleep Modes are disabled (SM = 0) and the device remains in Idle/Receive mode. When in this state, the device is constantly ready to respond to either serial or RF activity.
Parameter range
0, 1, 4, 5
| Parameter | Description |
|---|---|
| 0 | No sleep (disabled) |
| 1 | Pin sleep |
| 2 | Reserved |
| 3 | Reserved |
| 4 | Cyclic Sleep Remote |
| 5 | Cyclic Sleep Remote with pin wakeup |
Default
0
PDF
