Point-to-point networks

This following section provides the RF communication type and RF mode for XTC RF Module point-to-point networks.

Definition

Point-to-point means that an RF data link exists between two devices.

Sample network profile (Broadcast communications)

Use default values for all devices.

Sample network profile (Acknowledged communications)

Note Assume default values for all parameters that are not in this list. These profiles do not reflect addressing implementations.

1. Use XCTU or an alternative terminal program to send the AM command. See AM (Auto-set MY) for details.
2. Set the destination address to 0xFFFF, send: DT FFFF

Basic RF modes

Streaming, Multi-Transmit, Repeater.

Acknowledged RF mode

Acknowledged mode.