AnywhereUSB/5 (first generation)

By default, first generation AnywhereUSB/5 models support DHCP, but have static IP addresses.

Default IP address configuration:

• IP address: 192.168.254.222
• Subnet mask: 255.255.0.0

To configure a static IP address:

1. Open the AnywhereUSB Remote Hub Configuration Utility, which is included in the driver software you previously downloaded and installed. See Get started.
2. Select your AnywhereUSB/5 from the list on the left.
3. Click Configure.
4. Type the IP address, subnet mask, and default gateway.
5. Click Update.