Configuring IP pass-through

To configure IP Pass-through from the web interface for your Digi device:

Note Ensure you have completed at least the first three steps.

1. Set a static IP address for the Digi device. Go to Configuration > Network > IP Settings.
2. Set up the DHCP server. Go to Configuration > Network > DHCP Server Settings. See DHCP server settings and the online help for DHCP Server Settings.
3. Turn on the DHCP server. Go to Management > Network Services. In DHCP Server Management, click the Start button.

4. Configure IP pass‑through settings. Go to Configuration > Network > IP Pass‑through.

   IP pass-through settings include:

   • Enable IP Pass-through: Enables or disables IP Pass-through.
   • Pinhole Configuration: Specifies whether specific network services/ports are configured as pinholes for purposes of managing the Digi device.
5. Click Apply.