Assign an IP address from the web interface

Normally, you assign IP addresses to Digi Connnect WAN Family devices through DHCP. This procedure assumes that the Digi Connnect WAN Family device already has an IP address and you simply want to change it.

To change the IP address from the web interface:

1. Open a web browser and type the current IP address of the device in the address bar. A login dialog displays.
2. Enter the default user name and password for the device.
   • User name: The default user name is root.
   • Password: The unique default password is printed on the device label. If the password is not on the device label, the default password is dbps. If neither of the defaults work, the password may have been updated. Contact your system administrator.

   Note If this is the first time you have logged into the web interface, you are required to change the password.

3. Click Network to access the Network Configuration page.
4. On the IP Settings page, select Use the following IP address.
5. Type the IP address, subnet mask, and gateway settings.
6. Click Apply to save the configuration.