SIM Information

• Slot: The number of the socket containing the SIM card.
• IMSI:The International Mobile Subscriber Identity (IMSI) number that uniquely identifies the SIM card.
• Phone Number: The phone number associated with the mobile account, if available.

• Status: The configuration status of the SIM. It may be one of these values:

  • Not configured: A mobile service provider has not been configured. Select a provider on the Mobile Configuration page.
  • Disabled: The SIM will not be used to establish a mobile connection. To enable, click Apply on the Mobile Configuration page.
  • Not installed: The SIM card is not plugged into the Digi device server.
  • Primary: This is the preferred SIM to use to establish mobile connections.
  • Secondary: If a mobile connection cannot establish connection with the primary SIM, the mobile connection will establish a connection with the secondary SIM.

• PIN Status: The status of the PIN code that may be needed to use the SIM. It may be one of these values:

  • Ready: The PIN is correct, or no PIN is required.
  • Waiting for PIN: A PIN is required, but has not been configured. Type a PIN on the Mobile Configuration page.
  • PIN incorrect: The PIN is not correct. It will not be tried again to prevent locking the SIM. Type a new PIN on the Mobile Configuration page.
  • Waiting for PUK
    Waiting for PIN2
    Waiting for PUK2: An unlock code is required. This SIM must be unlocked before you can use it in the Digi device server.
• Active: The SIM used to establish a mobile connection.