SIM card selection and settings

The Digi device may be equipped with one or two Subscriber Identity Module (SIM) cards. A SIM card contains the account information associated with a particular mobile service provider.

All of the settings available on the Mobile Configuration page are stored individually for each SIM card.

SIM card settings include:

• SIM: Select the SIM card identified by the slot number.
• Set as Primary: Click to make this the preferred SIM to use to establish mobile connections.
• IMSI: The International Mobile Subscriber Identity (IMSI) number that uniquely identifies the SIM card.

• Phone Number: The phone number associated with the mobile account, if available.

  Note that the IMSI and phone number may not be available until the SIM attempts a connection.

• Status: The configuration status of the SIM. It may be one of these values:
  • Not configured: A mobile service provider has not been configured. Select a provider from the list under Mobile Service Provider Settings.
  • Disabled: The SIM will not be used to establish a mobile connection. To enable, click Apply under Mobile Settings.
  • Not installed: The SIM card is not plugged into the Digi device server.
  • Primary: This is the preferred SIM to use to establish mobile connections.
  • Secondary: If you cannot establish a connection the primary SIM, a connection will be established with the secondary SIM.