Industrial Automation-Modbus-Bridge

Industrial Automation is supported in the following Digi devices:

• Digi Connect WAN IA and Digi Connect WAN 3G IA

Currently, from the web interface, it is only possible to select a different port profile than Industrial Automation, or change the serial port settings, such as baud rate and parity. If changes are needed from the settings established by the Industrial Automation port profile, use the set ia command from the command-line interface.

For more information on Industrial Automation, see the set ia command description in the Digi Connect® Family Command Reference and the application note Remote Cellular TCP/IP Access to Modbus Ethernet and Serial Devicesavailable on the Digi Support site.