AnywhereUSB/TS44 components
![]() |
Item | Name | Description |
---|---|---|
1 | System Status LED | When the device is powered on and in normal operation, the System Status LED blinks green. If the System Status light blinks red for an extended period of time, contact Digi Technical Support. |
2 | USB LEDs and ports | Four USB ports and corresponding LEDs. A USB LED is solid green when its USB port is connected to a host computer. A USB LED is off when its USB port is not connected to a host computer. |
3 | Reset button | Use this button to either restart the device or reset its configuration to factory defaults. |
4 | Power connector | Use the included power adapter. |
5 | Ethernet connector |
The left Ethernet LED is green when connected to a network and the right Ethernet LED blinks orange when there is data transmission activity on the port. Use a standard Ethernet cable. Note The AWUSB/14 has one network interface that supports one IP address. For more information, see AnywhereUSB/14 redundancy features in detail Knowledge Base article at knowledge.digi.com. |
6 | RS-232 RJ45 serial ports |
Use these serial ports when using RealPort or for console access to the AnywhereUSB device. For more information about compatible Digi cables and cable adapters, see Serial Cables on www.digi.com. |