AnywhereUSB/14 components

Item Name Description
1 System Status LED When the device is powered on and in normal operation, the System Status LED blinks slow green. If the System Status light blinks red for an extended period of time, contact Digi Technical Support.
2 USB LEDs and ports Fourteen USB ports with corresponding LEDs. A USB LED is solid green when a USB port is connected to a host computer. A USB LED is off when a USB port is not connected to a host computer.
3 Reset button Use this button to either restart the device or reset its configuration to factory defaults.
4 Power connector The AnywhereUSB/14 has two power connectors. When using only one power cable, you can use either of the power connectors. Use the included power cables.
5 RS-232 DB9 serial port Use these serial ports when using RealPort or for console access to the AnywhereUSB device.
6 Ethernet connector

The AnywhereUSB/14 has two Ethernet connectors for redundancy. The left Ethernet LED is green when connected to a network and the right Ethernet LED blinks orange when there is data transmission activity on the port.

Use the ports as follows:

  • LAN1 is the primary Ethernet port. Use this port when connecting only one Ethernet cable or as the main Ethernet connection when connecting both Ethernet ports.
  • LAN2 is the secondary Ethernet port and is used only for redundancy. Only connect an Ethernet cable to this port when you are already using LAN1.

Use a standard Ethernet cable.