info ia

Purpose

Displays statistics relating to Industrial Automation (IA).

Statistics that display are gathered since the statistic tables were last cleared by rebooting the Digi device, and include data, event, and error counts. These statistics are useful in understanding how the device is operating and can be helpful in finding problems. In particular, if an error counter is found to be increasing there may be a problem with the device.

To reset the statistics, reboot the device.

Required permissions

For Digi products with two or more users, permissions must be set to set permissions display=execute to use this command. See set permissions for details on setting user permissions for commands.

Syntax

info ia

Example

#> info ia

IA Stats:

 critical errors                     :          0
 configuration errors                :          0
 resource errors                     :          0
 bad message errors                  :          0
 timeout errors                      :          0
 discarded messages                  :          0
 broadcast messages                  :          0
 discarded broadcast messages        :          0
 disconnects                         :          0
 idle disconnects                    :          0
 kill disconnects                    :          0
 broadcasts                          :          0
 incoming requests                   :          0
 outgoing requests                   :          0
 incoming responses                  :          0
 outgoing responses                  :          0

See also

• info commands display statistical information about a device over time. In contrast, display commands focus display on real-time information, while the status command displays the status of outgoing connections (connections made by connect, rlogin, or telnet commands).
• boot to reset statistics.
• The display commands, to display current device status information for various features and functions.
• show
• status
• set ia